Choose polycarbonate, ABS or PC/ABS for your prototype by the test it must survive — impact, snap-fit cycling, heat, clarity
Choose polycarbonate, ABS or PC/ABS for your prototype by the test it must survive — impact, snap-fit cycling, heat, clarity
A complete engineering guide to seal and gasket design — covering compression set, groove geometry, static vs. dynamic seals, and material selection for NBR, EP
Compare TPU vs TPE on abrasion resistance, chemical resistance, and processing to make the right material choice for injection molding and manufacturing.
Compare LSR, HCR, and compression silicone molding methods across process, cost, precision, and volume to choose the right approach for your project.
Compare TPE and silicone on temperature resistance, regulatory compliance, and the cost drivers behind each — and see how to get grade-specific pricing for your project.
Learn how the durometer scale works, what Shore A, Shore D, and Shore 00 mean, and how to specify rubber hardness for seals, gaskets, and molded parts.
Understand Shore hardness scales A, D, and OO — how each is measured, what materials they cover, and how to apply them in manufacturing decisions.
A complete guide to medical grade silicone grades, certifications (USP Class VI, ISO 10993, FDA), and practical selection criteria for medical device engineers.
TPE materials explained: the six TPE families, Shore hardness, temperature limits, TPE vs silicone, and how to choose the right grade before tooling.
Not sure whether to use die casting or injection molding? This guide breaks down materials, tolerances, costs, and applications to help you choose.
Magnesium die casting is ~35% lighter than aluminum and ~78% lighter than steel. See the real trade-offs: corrosion, creep limits, cost and design rules.
A practical guide to six aluminum sheet metal alloy series, temper designations, and how they affect forming behaviour — from bend radius to springback compensation.